Belts Qty
Fine Screening?
WE WANT TO INSTAL A SCREEN MACHINE IN ONE OUR OVERSEAS PROJECT TO SEPARATE DUST/MUD. THE DETAIL OF SCREEN ARE AS UNDER:- 1)MATERIAL TO BE HANDLED :- CRUSHED AGGREGATE 2)CAPACITY :- 70TPH 3)FEEDING EQUIPMENT :- BELT COPNVEYOR 4)TYPE OF SCREEN :- TO SELECT 5)MATERIAL TO BE SCREEN :- BELOW 6MM. OVER SIZE :- (-)75 TO (-)6MM 6) QTY :-4 NOS CAN SOMEONE SUGGEST THE FOLLOWING:- 1)TYPE OF SCREEN IE ROTARY / VIBRATING 2) SIZE OF SCREEN 3) MOTOR HP ETC. 4) MANUFACTURER NAME THANKS AND REGARDS
Some General Answer: Assuming reasonably free flowing material under 6% moisture (which by the way is considered dry)
Your information and my response below:
MATERIAL TO BE HANDLED :- CRUSHED AGGREGATE
I will make assumption .....100 lbs/cu/ft typical limestone
2)CAPACITY :- 70TPH
I will assume (STPH) Imperial Tons
3)FEEDING EQUIPMENT :- BELT COPNVEYOR
Conveyor should be miniumum 36" wide, but ensure a full spread to full width of the screen to ensure we get the tonnage out
4)TYPE OF SCREEN: See below pick
5)MATERIAL TO BE SCREEN :- BELOW 6MM
Assume install 6mm square opening,T304 Stainless Steel, middling wire diameter range (Could go FLEXMAT) if needed - a superior choice especially if crushed material
OVER SIZE :- (-)75 TO (-)6MM
6) QTY :-4 NOS ???
CAN SOMEONE SUGGEST THE FOLLOWING:-
1)TYPE OF SCREEN IE ROTARY / VIBRATING
Circle throw, vibratings screen at 25 degree decline,
1/4 (6mm) circle 1000-1100 rpm range, running counterflow
rotation
2) SIZE OF SCREEN: 5x16 (90 sq ft screening area) Assuming we can pass between .8 to 1.0 tons per sq foot by sizing and without the benefit of a full sieve analysis of the feed
3) MOTOR HP ETC. 7.5 Hp
4) MANUFACTURER NAME: Dillon screen 2 brg circle throw inclined
NOTE: Could be smaller depending on sieve analysis....if we do anything here.....SMALLER stroke and faster RPM and steeper angle are all do-able by the rules.
Many makes of screens can do this job quite nicely.
http://www.break-day.com/
http://www.mycrusher.cn
 2 x 72 sanding belts 220 grit flex material qty 10  US $40.00
|
 2 x 72 sanding belts 320 grit flex material qty 10 US $40.00
|
 4 x 21 SANDING BELTS ASST FINE qty 10 US $16.50
|
 4 x 21 SANDING BELTS ASST COARSE qty 10 US $16.50
|
 3 x 18 sanding belts 40 grit qty 10 US $9.00
|
 3 x 18 sanding belts 36 grit qty 10 US $9.00
|
 3 x 18 sanding belts 50 grit qty 10 US $9.00
|
 3 x 18 sanding belts 60 grit qty 10 US $9.00
|
 3 x 18 sanding belts 80 grit qty 10 US $8.00
|
 3 x 18 sanding belts 120 grit qty 10 US $8.00
|
 Glass Grinding Sanding Belt 1 1 8 x 21 x 120 QTY 10 US $14.99
|
 NORTON BELTS BEAR TEX VERY FINE 4 X 118 QTY 2 US $59.99
|
 3M Abrasive Belts 3 x 24 x 80 Grit Qty 8 US $12.95
|
 PORTER CABLE 3x24 SANDING BELTS 80G QTY 5 713000805 US $12.99
|
 PORTER CABLE 3x24 SANDING BELTS 120G QTY 5 713001205 US $12.99
|
 PORTER CABLE 3x24 SANDING BELTS 50G QTY 5 713000505 US $12.99
|
 PACO X268AA 150 Grit 2 x 18 Sanding Belts Qty 5 US $9.99
|
 SAIT 3A X P40 Grit Sanding Belts 1 1 2 x 18 Qty 5 US $9.99
|
 Glass Grinding Sanding Belts 3 x 21 x 800 QTY 10 US $25.99
|
 Glass Grinding Sanding Belts 3 x 21 x 400 QTY 10 US $25.99
|
 Glass Grinding Sanding Belts 3 x 21 x 220 QTY 10 US $25.99
|
 Glass Grinding Sanding Belts 3 x 21 x 180 QTY 10 US $25.99
|
 Glass Grinding Sanding Belts 3 x 21 x 120 QTY 10 US $25.99
|
 Glass Grinding Sanding Belts 3 x 21 x 80 QTY 10 US $25.99
|
 Glass Grinding Sanding Belt 1 1 8 x 21 x 800 QTY 10 US $15.99
|
 Glass Grinding Sanding Belt 1 1 8 x 21 x 400 QTY 10 US $15.99
|
 Glass Grinding Sanding Belt 1 1 8 x 21 x 220 QTY 10 US $14.99
|
 NEW1x1860 GRITBELT SANDER PAPERQTY 10FREE SHIPPING US $15.99
|
 qty 50 R981 Norton sg r 1 2 x 24 120G sanding belts US $39.99
|
 GATOR SANDING BELT 80 GRIT QTY 4 US $18.00
|
 GATOR SANDING BELT 120 GRIT QTY 6 US $25.00
|
 GATOR SANDING BELT 40 GRIT QTY 6 US $25.00
|
 3 x 18 sanding belts 180 grit qty 10 US $9.00
|
 3 x 18 sanding belts 220 grit qty 10 US $9.00
|
 3 x 18 sanding belts 240 grit qty 10 US $9.00
|
 3 x 18 sanding belts 400 grit qty 10 US $9.00
|
 3 x 21 sanding belts 36 grit qty 10 US $10.00
|
 3 x 21 sanding belts 40 grit qty 10 US $10.00
|
 3 x 21 sanding belts 50 grit qty 10 US $10.00
|
 3 x 21 sanding belts 60 grit qty 10 US $10.00
|
 3 x 21 sanding belts 80 grit qty 10 US $10.00
|
 3 x 21 sanding belts 100 grit qty 10 US $10.00
|
 3 x 21 sanding belts 120 grit qty 10 US $10.00
|
 3 x 21 sanding belts 150 grit qty 10 US $10.00
|
 3 x 21 sanding belts 180 grit qty 10 US $10.00
|
 3 x 21 sanding belts 240 grit qty 10 US $10.00
|
 3 x 21 sanding belts 320 grit qty 10 US $10.00
|
 3 x 21 sanding belts 400 grit qty 10 US $10.00
|
 4 x 21 x 24 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 36 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 40 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 50 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 60 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 80 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 100 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 150 grit SANDING BELTS qty 10 US $16.50
|
 4 x 21 x 180 grit SANDING BELTS qty 10 US $16.50
|
| Powered by phpBay Pro |
 |
Min Qty 25 Tote Bags, Polka Dot Belts, 16 x 12-1/2
 |
DescriptionOur playful Polka Dot Belt Totes are roomy and chic all at the same time. These personalized tote bags are ideal for tradeshows, customer or employee gifts, re-useable shopping bags, outdoor promotions and more... |
 |
Dymo LabelWriter 1 Day Self Expiring Security Stickers 100 stickers per box Direct thermal
List Price: |
DescriptionDYMO LabelWriter 1 Day Self Expiring Security Stickers 100 stickers per box Features
|
 |
Lexmark #36 Black Twin Pack Return Program Print Output Color Black Yield Up To 175 Pages
List Price: |
DescriptionThis high-resolution black cartridge uses Lexmark's exclusive pigmented black ink. This ink coupled with an increased number of printhead nozzles and swath size, enables consumers to consistently produce high-quality prints at unprecedented print speeds... Features
|
 |
Leather Case for O2 Mini
|
DescriptionThis leather flip case has been specially designed for the iMate JAM, Qtek S100, MDA Compact and O2 XDA II Mini. It has holes or cut-outs for a charger, earphone, loudspeakers and easy access to buttons, etc... Features
|
 |
Invacare Gait and Transfer Belt 54" ROYAL BLUE QTY: 1
|
Description2" wide, adjustable cotton belt, with plastic side release buckle. Used to assist with ambulation and with transferring from bed to chair. Machine washable. Features
|
 |
80318 Belt Gait Patriot Cotton Waist 72" #1 Stripe Ea Part# 80318 byKinsman, Enterprises, Inc qty of 1 Unit
|
 |
Grommet Pliers with Qty 100, 3/16" Grommets of Brass, Steel, Copper
|
DescriptionGrommet setting pliers and 100 grommets can be used to apply grommets to belts, shoes, shower curtains, tote bags, or tents. Grommet set: 5-3/4" long, 3/4" jaw opening Features
|
 |
1/2 X 53 Scotts 774022 V Belt, Murray 37x92 & 710532 Secondary Blade Drive Belt, QTY of 3
|
DescriptionProduct No: BELT-774022-qty3 - Made by: Murray - Length: 53.00" - Width: 0.50" - Shipping Weight: 2 Pounds - Condition: New - QUANTITY OF 3 Description: OEM SPEC BELT Replaces (OEM): MURRAY 37X92 MURRAY 710532 Fits Models: MURRAY 52" GT old style; 48", 50" and 52" cut decks;Scotts 50" LT |
Volt Blades
Diamond Willow
Highly Figured
Sears Craftsman
Furniture Walls
Cherry Pen
Hands Magnifying
Boring Spade
Wood Glue
Stabilized Jumbo